|
|
 |
|
 |
|
|
 |
Dust Collector Remote Switch
Conveniently turn your dust collector on and off from any place in your workshop! Simply press on/off button on the transmitter handpiece.Signal will travel up to 50 ft. and easily passes through walls!Easy installation. Just plug your dust collector into transmitter box and your ready to go.6' grounded cord.110 volt works up to 1.5Hp dust collectors. |
|
 |
Dust Grounding Kit
Improve dust collecting safety using this kit. Includes 50 feet of braided bare copper multi-strand wire, two grounding screws, a 3/32' drill bit, two ring terminals, and five wire connectors. A continous wire from each dust collection point to the dust collector is recommended. |
|
 |
Less Mess Dust Collector
A low cost alternative dust collection system! Designed for use with most open stand, contractor type saws. Dust falls into collector, which can be snapped off for quick and easy emptying. |
|
 |
Spiral Pipe and Fittings for Dust Collection System
Safety, efficiency, and strength are coiled together in these superior dust collection pipes and fittings. All steel construction offers superior rigidity, minimizes static discharge, and adds strength. Additional freight charges apply. |
|
 |
Mr Nozzle
Clean up with these great products! Mr. Nozzle features a durable polyethylene hose that's manufactured to last through a lifetime of use while actually improving the performance of your wet/dry vac! |
|
 |
Universal Dust Adapter
7-step adapter provides a multitude of dust collection reducing options. Outside diameter sizes include 1, 2, 2-1/2, 3, 4, 5 and 6. Measures 9-1/2 L x 6 W x 6 Deep. |
|
 |
412 3 Keyed Hose Clamps
Keyed hose clamps have a thumb screw that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, changing or cleaning your dust collection system easier! 5 per pack. |
|
 |
Tabletop Dust Fitting
Large 12-1/2 x 16-1/2 hood opening makes this ideal for collecting dust from miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods.Lightweight and portable; easy to position anywhere.With 4 port connection.Hood depth is 10-1/2.Plastic. |
|
 |
4 Dust Coupling
Allows you to connect two 4' fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. Coupling has 4 ID on each to accept 4 OD fittings. Plastic. |
|
 |
Counter Dust Brush
Get superior sweeping action picking up fine dust and debris! The full 13' length cleans up a large surface quickly. Brush is manufactured of polypropylene in a sandalwood color and filled with copper colored plastic bristles. A total of 73 tuffs of fill, trimmed to a bristle length of 2 - 1/2'. Total length is 13 - 3/8 ' with a bristle area of 9' long X 3 - 1/2' wide'. |
|
 |
Clear Flexible Dust Collection Hose
Available in 2-1/2 and 4 diameters and 10 foot lengths. Wire reinforced. One foot length available for short leads on power tools with hard to reach dust ports (4' diameter). |
|
 |
Metal Blast Gates
Heavy-duty construction is longer lasting and less likely to jam than plastic blast gates. Designed to fit inside the 4' or the 2-1/2' clear flexible hose. |
|
 |
4 Clamped Quick Disconnect Fitting
For use with 4' hose and hose clamps (sold separately). Flared end allows you to quickly connect or disconnect any woodworking machine or fitting with a standard 4 port. 63577 (not pictured) has one end with threads that fit our 2-1/2' clear hose, while the opposite end is flared for standard 4' ports. |
|
 |
Steel Base Clamps
Available for both 2-1/2 and 4 hose. Comes in pack of 5. Use flat bladed screwdriver to tighten. |
PREV20<< 1 2 3 4 5 >>NEXT20
|
 |
|
 |
|
|
|
