|
|
 |
|
 |
|
|
 |
Classic Oak Bracket
Provides solid support with a classic contour. Beautiful solid oak fitted with a metal keyhole hangar. 1' W. |
|
 |
SideMount Bracket
This Side Mount Bracket automatically locks into position when raised. Light pressure on the integral release button on the end of the bracket releases the bracket. |
|
 |
Folding Shelf Brackets
Flexible enough to work in tight spaces, sturdy enough to hold up to 750 lbs. per pair! |
|
 |
Jams Shelf Brackets
Your glass and wood shelves deserve these handsome brackets! After mounting, sandwich the back edge of any shelf between jaws and tighten to hold in place. When properly mounted to wall studs, brackets support up to 40 lbs. per pair. For shelving 3/16' to 3/4' thick and a maximum of 7-7/8' deep. Jaw opening 13/16' to 25/32'.Brackets include wall anchors and screws. Sold in pairs. |
|
 |
StorAway Work Station Brackets
Heavy-gauge steel folding brackets let you fold away shelving for easy storage and extra work area. Ideal for small work spaces, garages, garden sheds or hobby areas. |
|
 |
14 Shelf Supports
1/4' shelf supports. Rubber cushions also available. These 1/4' shelf supports come in nickel, brass, or antique brass finish. Sold in packs of 16. Use rubber cushions to reduce slippage (sold separately). Available in packs of 16. |
|
 |
14 Cushioned Shelf Pins
These 1/4' cushioned shelf pins are gentle on shelves. These 1/4' cushioned shelf pins are brass plated steel with a plastic wrapped support that is gentle on shelves. Available in packs of 16. JIG IT Shelving JigDial-Up (1.19MB) or Broadband (5.86MB) --- |
|
 |
5mm Pin Supports
These 5mm pin supports for shelves and optional sleeves (shown) both come in packs of 16. Available in nickel, brass, antique brass, or black finish. JIG IT Shelving JigDial-Up (1.19MB) or Broadband (5.86MB) --- |
|
 |
14 Pin Supports
These 1/4' pin supports for shelves and optional sleeves (shown) both come in packs of 16. Available in nickel, brass, antique brass, or black finish. JIG IT Shelving JigDial-Up (1.19MB) or Broadband (5.86MB) --- |
|
 |
Shelf Supports
These shelf supports project 5/8' and insert in 5mm hole. Come in packs of 16. |
|
 |
14 Shelf Plastic Supports
These 1/4' shelf supports are made of durable plastic. They are available in 2 colors: tan or clear. Sold in packs of 16. |
|
 |
Low Profile 14 Shelf Supports and Standards
This innovative shelving system recesses into the woodwork so it's almost invisible. Just cut a 1/4' wide by 1/2' deep mortise to install the 51' long standards. Shelves adjust for 32mm or 1-1/4' spacing. Standards made of durable brown plastic. Supports made from steel with a statuary bronze finish. |
|
 |
Walnut Shelf Standards
These walnut-colored shelf standards can be either flush or surface mounted. Walnut-colored standards are made from aluminum. Nails are furnished. Dimensions are 5/8' wide x 3/16' thick. Shelves may be adjusted for 1/2' spacing.Matching-color supports are also available. Supports measure 9/16' wide by 3/4' long. Support clips sold separately. |
PREV20<< 1 2 >>NEXT20
|
 |
|
 |
|
|
|